BudsGunShop.com - Is this .308 compatible?

Some military chambers for 7.62x51 can run head space to 1.645 which will stretch a 308 win. case to the point that it may separate. Won't hurt you much, but not a good situation. Have the chamber checked and see if it is chambered short enough to run 308 safely. If so then you can shoot both. You can fire a 7.62 in it then black up the shoulder with a magic marker. Set your dial calipers to .400 and set them on the shoulder to leave a mark on both sides. Then measure the head 2 times to both marks and average your readings. If it measures 1.634-1.627 it is safe for 308.

Thomas - Copied directly from the owner manual of the SIG 716 rifle: "The rifle is chambered in 7.62x51mm naTo and is compatible with .308 Winchester ammunition" (Page 21 - Owners manual) sigsauer.com/wp-content/uploads/2016/07/SIG716.pdf So, YES the rifle is compatible with 308 Winchester Ammunition.

Thomas, the SIG 716G@ has long been advertised with 308. For warranty and safety reasons confirm this directly with SIG at 603-610-3000 option 1 ---- 8:00am – 5:30pm EST.

Thomas - Copied directly from the owner manual of the SIG 716 rifle: "The rifle is chambered in 7.62x51mm naTo and is compatible with .308 Winchester ammunition" (Page 21 - Owners manual) sigsauer.com/wp-content/uploads/2016/07/SIG716.pdf So, YES the rifle is compatible with 308 Winchester Ammunition.

7.62x51 ONLY see specs SPECS
OPERATING SYSTEM
Gas Piston
*******CALIBER
6.5 CM / 7.62 NATO
OVERALL LENGTH
35.8 in (909mm) / 37 in (940 mm)
OVERALL WIDTH
2.9 in (74 mm)
HEIGHT
7.5 in (191 mm)
BARREL LENGTH
16 in (406mm) / 18 in (457mm)
WEIGHT
8.5 lb (3.9 kg) / 8.8 lb (4 kg)
TWIST RATE
1:10
MAG TYPE
SR25